- 1 intro
- 2 Connection to internet
- 3 LAN @ Whitespace
This page was created for the sole purpose of creating clarity in the networking thingies at 0x20.
Connection to internet
After discussing multiple options, we decided to go with Dommel: fast access, cheap, no caps, no ports blocked. We went with the lower cost - lower speed option, with the idea that, if we want more, we can always upgrade.
Note: We are currently not using anything of the web- and mailservice below.
Advanced modem/router settings:
|protocol:||rfc 2684 (aka 1483) multi-protocol over atm (bridged or routed)|
More router settings
Default Gateway: 18.104.22.168 Preferred DNS Server: 22.214.171.124 Alternate DNS Server: 126.96.36.199 Downstream Line Rate (Kbps): 12742 Upstream Line Rate (Kbps): 945 VPI/VCI Service Name Protocol IGMP QoS Status IP Address Subnet Mask 8/35 mer_8_35 MER Disable Disable Enable 188.8.131.52 255.255.255.0
web- and mailservice:
Your personal homepage at http://yourchoice.dommel.be has not yet been activated. To activate, login at https://crm.schedom-europe.net with username "firstname.lastname@example.org" and password "xxx". Click on "My Packages" -> Click on the "E" at the right of your adsl-account. You can configure your @dommel.be emailaccounts by clicking on the "O".
If you have any questions, please first check our support pages at https://crm.schedom-europe.net (click on "online faq"). If you cannot find an answer to your questions here, you can open a ticket at https://crm.schedom-europe.net (click on "support-desk"), or contact us by telephone every workingday between 09.00 and 18.00 (+32 70 224 305) or by fax (+32 70 224 305).
We also have a connection to the wireless antwerp network Wireless_Antwerp
LAN @ Whitespace
You can find the backup config files here: File:Network configurations v1.7z
The Modem: DLink DSL-2740B
We use this modem for the adsl connection to Dommel. Beware when you configure the modem: once every x restarts, the adsl stops working. Waiting a few minutes and restarting it again seems to fix it...
Dommel uses dhcp to give us an ip (although the ip itself is static). Because the modem randomly fails to do the dhcp, we configured the modem as bridge (translate adsl to ethernet). The router (totoro) now does the dhcp.
Totoro: the router
The cisco RV082 router serves as the main router. It has the following functions:
- dhcp server which gives out ip's in the range 172.22.32.50-200 (also gives the googleDNS as DNS servers)
- 2 WAN connections: One to Dommel, one to Wireless Antwerp.
- static ip configured for gatekeeper 172.22.32.14 => 00 00 24 c8 99 cc
The load-balancing and failover is configured so that:
- all traffic from LAN ip's in range 172.22.32.0-200 (includes the full dhcp range) goes default through dommel's ADSL(wan2)
- all traffic from LAN ip's in range 172.22.32.201-254 goes default through the Wireless Antwerp uplink (wan1)
- If one of the interfaces goes down (interfaces are being checked by pinging 184.108.40.206), all traffic goes through the other interface
username/password admin/unicorns LAN side IP: 172.22.32.1/24 WA side (WAN1) IP: automatic(dhcp from WA antenna) Modem side (WAN2/DMZ) IP: automatic(dhcp from dommel)
Cisco AirPlus 2.4 ghz Wireless Access point
There are a few of them around the space. You can reset the AP's to factory settings by holding the reset button for 20 seconds. They provide 2 wireless network:
- WPA key: unicorns
- Is connected to Totoro