|Documenting network stuff at 0x20|
This page was created for the sole purpose of creating clarity in the networking thingies at 0x20.
note: This schema accepts patches. You can find the .dia-file (sudo apt-get install dia) at http://members.0x20.be/cedric/Network_0x20.dia
Whitespace, our hackerspace, has a LAN which connects local machines in the network 172.22.32.0/24. We provide ethernet and Wifi access to connect to the network.
Our friends from IBBT (http://www.ibbt.be) have provided us with a virtual server in their data center, which is awesome! It has a massive internet connection and that is why this server is often referred to as "Big Pipe"<ref>Big pipe server</ref>.
To link 2 locations you have 2 options:
- Provide your own infrastructure: connect the two sites with a physical cable
- Use existing infrastructure to connect the two sites: connect through the interwebs
For a whole bunch of reasons, option #1 is a bit impractical, so the way to go is through the interwebs. That is exactly what is done between 0x20 and IBBT, we've created a so called Virtual Private Network or VPN, which in this case is nothing more than a point-to-point tunnel over the internet connecting 0x20 and IBBT in the same private network. This setup is documented in project OpenVPN<ref>Project OpenVPN</ref>.
LAN @ 0x20
I'm currently in the process of creating a new intranet at 0x20 with server Kimball as the central server for DHCP, DNS and Routing.
Network interfaces on Kimball
Kimball has two network interfaces:
# The primary network interface # eth0 is the WAN-side of our router and takes an IP from Dommel over DHCP auto eth0 iface eth0 inet dhcp # eth1 is the LAN-side of our router. It has a static ip and currently it uses Soekris as DNS server auto eth1 iface eth1 inet static address 172.22.42.1 gateway 172.22.42.1 netmask 255.255.255.0 network 172.22.42.0 broadcast 172.22.42.255 nameserver 172.22.32.14